Proyecto LCX Dispatcharr multicuenta

debian_install.sh

@@ -0,0 +1,505 @@
+#!/usr/bin/env bash
+
+set -euo pipefail
+IFS=$'\n\t'
+
+# Root check
+if [[ $EUID -ne 0 ]]; then
+  echo "[ERROR] This script must be run as root." >&2
+  exit 1
+fi
+
+trap 'echo -e "\n[ERROR] Line $LINENO failed. Exiting." >&2; exit 1' ERR
+
+##############################################################################
+# 0) Locales & Warning / Disclaimer
+##############################################################################
+
+setup_locales() {
+  echo ">>> Setting up locales..."
+  apt-get update
+  apt-get install -y locales
+  sed -i '/en_US.UTF-8 UTF-8/s/^# //g' /etc/locale.gen
+  locale-gen
+  update-locale LANG=en_US.UTF-8
+  export LANG=en_US.UTF-8
+  export LC_ALL=en_US.UTF-8
+}
+
+show_disclaimer() {
+  echo "**************************************************************"
+  echo "WARNING: While we do not anticipate any problems, we disclaim all"
+  echo "responsibility for anything that happens to your machine."
+  echo ""
+  echo "This script is intended for **Debian-based operating systems only**."
+  echo "Running it on other distributions WILL cause unexpected issues."
+  echo ""
+  echo "This script is **NOT RECOMMENDED** for use on your primary machine."
+  echo "For safety and best results, we strongly advise running this inside a"
+  echo "clean virtual machine (VM) or LXC container environment."
+  echo ""
+  echo "Additionally, there is NO SUPPORT for this method; Docker is the only"
+  echo "officially supported way to run Dispatcharr."
+  echo "**************************************************************"
+  echo ""
+  echo "If you wish to proceed, type \"I understand\" and press Enter."
+  read user_input
+  if [ "$user_input" != "I understand" ]; then
+    echo "Exiting script..."
+    exit 1
+  fi
+}
+
+##############################################################################
+# 1) Configuration
+##############################################################################
+
+configure_variables() {
+  DISPATCH_USER="dispatcharr"
+  DISPATCH_GROUP="dispatcharr"
+  APP_DIR="/opt/dispatcharr"
+  DISPATCH_BRANCH="main"
+  POSTGRES_DB="dispatcharr"
+  POSTGRES_USER="dispatch"
+  POSTGRES_PASSWORD="secret"
+  NGINX_HTTP_PORT="9191"
+  WEBSOCKET_PORT="8001"
+  GUNICORN_RUNTIME_DIR="dispatcharr"
+  GUNICORN_SOCKET="/run/${GUNICORN_RUNTIME_DIR}/dispatcharr.sock"
+  PYTHON_BIN=$(command -v python3)
+  SYSTEMD_DIR="/etc/systemd/system"
+  NGINX_SITE="/etc/nginx/sites-available/dispatcharr"
+}
+
+##############################################################################
+# 2) Install System Packages
+##############################################################################
+
+install_packages() {
+  echo ">>> Installing system packages..."
+  apt-get update
+  declare -a packages=(
+    git curl wget build-essential gcc libpq-dev
+    python3-dev python3-venv python3-pip nginx redis-server
+    postgresql postgresql-contrib ffmpeg procps streamlink
+    sudo
+  )
+  apt-get install -y --no-install-recommends "${packages[@]}"
+
+  if ! command -v node >/dev/null 2>&1; then
+    echo ">>> Installing Node.js..."
+    curl -sL https://deb.nodesource.com/setup_24.x | bash -
+    apt-get install -y nodejs
+  fi
+
+  systemctl enable --now postgresql redis-server
+}
+
+##############################################################################
+# 3) Create User/Group
+##############################################################################
+
+create_dispatcharr_user() {
+  if ! getent group "$DISPATCH_GROUP" >/dev/null; then
+    groupadd "$DISPATCH_GROUP"
+  fi
+  if ! id -u "$DISPATCH_USER" >/dev/null; then
+    useradd -m -g "$DISPATCH_GROUP" -s /bin/bash "$DISPATCH_USER"
+  fi
+}
+
+##############################################################################
+# 4) PostgreSQL Setup
+##############################################################################
+
+setup_postgresql() {
+  echo ">>> Checking PostgreSQL database and user..."
+
+  db_exists=$(sudo -u postgres psql -tAc "SELECT 1 FROM pg_database WHERE datname='$POSTGRES_DB'")
+  if [[ "$db_exists" != "1" ]]; then
+    echo ">>> Creating database '${POSTGRES_DB}' with UTF8 encoding..."
+    sudo -u postgres createdb -E UTF8 "$POSTGRES_DB"
+  else
+    echo ">>> Database '${POSTGRES_DB}' already exists, skipping creation."
+  fi
+
+  user_exists=$(sudo -u postgres psql -tAc "SELECT 1 FROM pg_roles WHERE rolname='$POSTGRES_USER'")
+  if [[ "$user_exists" != "1" ]]; then
+    echo ">>> Creating user '${POSTGRES_USER}'..."
+    sudo -u postgres psql -c "CREATE USER $POSTGRES_USER WITH PASSWORD '$POSTGRES_PASSWORD';"
+  else
+    echo ">>> User '${POSTGRES_USER}' already exists, skipping creation."
+  fi
+
+  echo ">>> Granting privileges..."
+  sudo -u postgres psql -c "GRANT ALL PRIVILEGES ON DATABASE $POSTGRES_DB TO $POSTGRES_USER;"
+  sudo -u postgres psql -c "ALTER DATABASE $POSTGRES_DB OWNER TO $POSTGRES_USER;"
+  sudo -u postgres psql -d "$POSTGRES_DB" -c "ALTER SCHEMA public OWNER TO $POSTGRES_USER;"
+}
+
+##############################################################################
+# 5) Clone Dispatcharr Repository
+##############################################################################
+
+clone_dispatcharr_repo() {
+  echo ">>> Installing or updating Dispatcharr in ${APP_DIR} ..."
+  
+  if [ ! -d "$APP_DIR" ]; then
+    mkdir -p "$APP_DIR"
+    chown "$DISPATCH_USER:$DISPATCH_GROUP" "$APP_DIR"
+  fi
+
+  if [ -d "$APP_DIR/.git" ]; then
+    echo ">>> Updating existing Dispatcharr repo..."
+    su - "$DISPATCH_USER" <<EOSU
+    cd "$APP_DIR"
+    git fetch origin
+    git reset --hard HEAD
+    git fetch origin
+    git checkout $DISPATCH_BRANCH
+    git pull origin $DISPATCH_BRANCH
+EOSU
+  else
+    echo ">>> Cloning Dispatcharr repo into ${APP_DIR}..."
+    rm -rf "$APP_DIR"/*
+    chown "$DISPATCH_USER:$DISPATCH_GROUP" "$APP_DIR"
+    su - "$DISPATCH_USER" -c "git clone -b $DISPATCH_BRANCH https://github.com/Dispatcharr/Dispatcharr.git $APP_DIR"
+  fi
+}
+
+##############################################################################
+# 6) Setup Python Environment
+##############################################################################
+
+install_uv() {
+  echo ">>> Installing UV package manager..."
+  curl -LsSf https://astral.sh/uv/install.sh | sh
+  export PATH="$HOME/.local/bin:$PATH"
+}
+
+setup_python_env() {
+  echo ">>> Setting up Python virtual environment with UV..."
+
+  su - "$DISPATCH_USER" <<EOSU
+  set -euo pipefail
+  cd "$APP_DIR"
+  export PATH="\$HOME/.local/bin:\$PATH"
+
+  command -v uv >/dev/null 2>&1 || curl -LsSf https://astral.sh/uv/install.sh | sh
+
+  rm -rf env
+  $PYTHON_BIN -m venv env
+  env/bin/python -m ensurepip --upgrade
+
+  export UV_PROJECT_ENVIRONMENT="$APP_DIR/env"
+  uv sync --no-dev
+
+  env/bin/python -m pip install -q gunicorn
+EOSU
+
+  ln -sf /usr/bin/ffmpeg "$APP_DIR/env/bin/ffmpeg"
+}
+
+
+##############################################################################
+# 6.1) Ensure Environment File
+##############################################################################
+
+ensure_env_file() {
+  echo ">>> Ensuring DJANGO_SECRET_KEY exists in ${APP_DIR}/.env..."
+  su - "$DISPATCH_USER" <<EOSU
+set -euo pipefail
+cd "$APP_DIR"
+touch .env
+chmod 600 .env
+if ! grep -q '^DJANGO_SECRET_KEY=' .env; then
+  key=\$(env/bin/python - <<'PY'
+import secrets
+print(secrets.token_urlsafe(64))
+PY
+)
+  echo "DJANGO_SECRET_KEY=\$key" >> .env
+fi
+EOSU
+}
+
+
+##############################################################################
+# 7) Build Frontend
+##############################################################################
+
+build_frontend() {
+  echo ">>> Building frontend..."
+  su - "$DISPATCH_USER" <<EOSU
+cd "$APP_DIR/frontend"
+npm install --legacy-peer-deps
+npm run build
+EOSU
+}
+
+##############################################################################
+# 8) Create Directories
+##############################################################################
+
+create_directories() {
+  mkdir -p /data/logos
+  mkdir -p /data/recordings
+  mkdir -p /data/uploads/m3us
+  mkdir -p /data/uploads/epgs
+  mkdir -p /data/m3us
+  mkdir -p /data/epgs
+  mkdir -p /data/plugins
+  mkdir -p /data/db
+
+  # Needs to own ALL of /data except db
+  chown -R $DISPATCH_USER:$DISPATCH_GROUP /data
+  chown -R postgres:postgres /data/db
+  chmod +x /data
+
+  mkdir -p "$APP_DIR"/logo_cache
+  mkdir -p "$APP_DIR"/media
+  chown -R $DISPATCH_USER:$DISPATCH_GROUP "$APP_DIR"/logo_cache
+  chown -R $DISPATCH_USER:$DISPATCH_GROUP "$APP_DIR"/media
+}
+
+##############################################################################
+# 9) Django Migrations & Static
+##############################################################################
+
+django_migrate_collectstatic() {
+  echo ">>> Running Django migrations & collectstatic..."
+  su - "$DISPATCH_USER" <<EOSU
+set -euo pipefail
+cd "$APP_DIR"
+set -a
+source .env
+set +a
+export POSTGRES_DB="$POSTGRES_DB"
+export POSTGRES_USER="$POSTGRES_USER"
+export POSTGRES_PASSWORD="$POSTGRES_PASSWORD"
+export POSTGRES_HOST="localhost"
+env/bin/python manage.py migrate --noinput
+env/bin/python manage.py collectstatic --noinput
+EOSU
+}
+
+
+##############################################################################
+# 10) Configure Services & Nginx
+##############################################################################
+
+configure_services() {
+  echo ">>> Creating systemd service files..."
+
+  # Gunicorn
+  cat <<EOF >${SYSTEMD_DIR}/dispatcharr.service
+[Unit]
+Description=Gunicorn for Dispatcharr
+After=network.target postgresql.service redis-server.service
+
+[Service]
+User=${DISPATCH_USER}
+Group=${DISPATCH_GROUP}
+WorkingDirectory=${APP_DIR}
+RuntimeDirectory=${GUNICORN_RUNTIME_DIR}
+RuntimeDirectoryMode=0775
+EnvironmentFile=/opt/dispatcharr/.env
+Environment="PATH=${APP_DIR}/env/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin"
+Environment="POSTGRES_DB=${POSTGRES_DB}"
+Environment="POSTGRES_USER=${POSTGRES_USER}"
+Environment="POSTGRES_PASSWORD=${POSTGRES_PASSWORD}"
+Environment="POSTGRES_HOST=localhost"
+ExecStartPre=/usr/bin/bash -c 'until pg_isready -h localhost -U ${POSTGRES_USER}; do sleep 1; done'
+ExecStart=${APP_DIR}/env/bin/gunicorn \\
+    --workers=4 \\
+    --worker-class=gevent \\
+    --timeout=300 \\
+    --bind unix:${GUNICORN_SOCKET} \\
+    dispatcharr.wsgi:application
+Restart=always
+KillMode=mixed
+SyslogIdentifier=dispatcharr
+StandardOutput=journal
+StandardError=journal
+[Install]
+WantedBy=multi-user.target
+EOF
+
+  # Celery
+  cat <<EOF >${SYSTEMD_DIR}/dispatcharr-celery.service
+[Unit]
+Description=Celery Worker for Dispatcharr
+After=network.target redis-server.service
+Requires=dispatcharr.service
+
+[Service]
+User=${DISPATCH_USER}
+Group=${DISPATCH_GROUP}
+WorkingDirectory=${APP_DIR}
+EnvironmentFile=/opt/dispatcharr/.env
+Environment="PATH=${APP_DIR}/env/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin"
+Environment="POSTGRES_DB=${POSTGRES_DB}"
+Environment="POSTGRES_USER=${POSTGRES_USER}"
+Environment="POSTGRES_PASSWORD=${POSTGRES_PASSWORD}"
+Environment="POSTGRES_HOST=localhost"
+Environment="CELERY_BROKER_URL=redis://localhost:6379/0"
+ExecStart=${APP_DIR}/env/bin/celery -A dispatcharr worker -l info
+Restart=always
+KillMode=mixed
+SyslogIdentifier=dispatcharr-celery
+StandardOutput=journal
+StandardError=journal
+[Install]
+WantedBy=multi-user.target
+EOF
+
+  # Celery Beat
+  cat <<EOF >${SYSTEMD_DIR}/dispatcharr-celerybeat.service
+[Unit]
+Description=Celery Beat Scheduler for Dispatcharr
+After=network.target redis-server.service
+Requires=dispatcharr.service
+
+[Service]
+User=${DISPATCH_USER}
+Group=${DISPATCH_GROUP}
+WorkingDirectory=${APP_DIR}
+EnvironmentFile=/opt/dispatcharr/.env
+Environment="PATH=${APP_DIR}/env/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin"
+Environment="POSTGRES_DB=${POSTGRES_DB}"
+Environment="POSTGRES_USER=${POSTGRES_USER}"
+Environment="POSTGRES_PASSWORD=${POSTGRES_PASSWORD}"
+Environment="POSTGRES_HOST=localhost"
+Environment="CELERY_BROKER_URL=redis://localhost:6379/0"
+ExecStart=${APP_DIR}/env/bin/celery -A dispatcharr beat -l info
+Restart=always
+KillMode=mixed
+SyslogIdentifier=dispatcharr-celerybeat
+StandardOutput=journal
+StandardError=journal
+[Install]
+WantedBy=multi-user.target
+EOF
+
+  # Daphne
+  cat <<EOF >${SYSTEMD_DIR}/dispatcharr-daphne.service
+[Unit]
+Description=Daphne for Dispatcharr (ASGI/WebSockets)
+After=network.target
+Requires=dispatcharr.service
+
+[Service]
+User=${DISPATCH_USER}
+Group=${DISPATCH_GROUP}
+WorkingDirectory=${APP_DIR}
+EnvironmentFile=/opt/dispatcharr/.env
+Environment="PATH=${APP_DIR}/env/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin"
+Environment="POSTGRES_DB=${POSTGRES_DB}"
+Environment="POSTGRES_USER=${POSTGRES_USER}"
+Environment="POSTGRES_PASSWORD=${POSTGRES_PASSWORD}"
+Environment="POSTGRES_HOST=localhost"
+ExecStart=${APP_DIR}/env/bin/daphne -b 0.0.0.0 -p ${WEBSOCKET_PORT} dispatcharr.asgi:application
+Restart=always
+KillMode=mixed
+SyslogIdentifier=dispatcharr-daphne
+StandardOutput=journal
+StandardError=journal
+[Install]
+WantedBy=multi-user.target
+EOF
+
+  echo ">>> Creating Nginx config..."
+  cat <<EOF >/etc/nginx/sites-available/dispatcharr.conf
+server {
+    listen ${NGINX_HTTP_PORT};
+    location / {
+        include proxy_params;
+        proxy_pass http://unix:${GUNICORN_SOCKET};
+    }
+    location /static/ {
+        alias ${APP_DIR}/static/;
+    }
+    location /assets/ {
+        alias ${APP_DIR}/frontend/dist/assets/;
+    }
+    location /media/ {
+        alias ${APP_DIR}/media/;
+    }
+    location /ws/ {
+        proxy_pass http://127.0.0.1:${WEBSOCKET_PORT};
+        proxy_http_version 1.1;
+        proxy_set_header Upgrade \$http_upgrade;
+        proxy_set_header Connection "Upgrade";
+        proxy_set_header X-Real-IP \$remote_addr;
+        proxy_set_header X-Forwarded-For \$proxy_add_x_forwarded_for;
+        proxy_set_header Host \$host;
+    }
+}
+EOF
+
+  ln -sf /etc/nginx/sites-available/dispatcharr.conf /etc/nginx/sites-enabled/dispatcharr.conf
+  [ -f /etc/nginx/sites-enabled/default ] && rm /etc/nginx/sites-enabled/default
+  nginx -t
+  systemctl restart nginx
+  systemctl enable nginx
+}
+
+##############################################################################
+# 11) Start Services
+##############################################################################
+
+start_services() {
+  echo ">>> Enabling and starting services..."
+  systemctl daemon-reexec
+  systemctl daemon-reload
+  systemctl enable --now dispatcharr dispatcharr-celery dispatcharr-celerybeat dispatcharr-daphne
+}
+
+##############################################################################
+# 12) Summary
+##############################################################################
+
+show_summary() {
+  server_ip=$(ip route get 1 | awk '{print $7; exit}')
+  cat <<EOF
+=================================================
+Dispatcharr installation (or update) complete!
+Nginx is listening on port ${NGINX_HTTP_PORT}.
+Gunicorn socket: ${GUNICORN_SOCKET}.
+WebSockets on port ${WEBSOCKET_PORT} (path /ws/).
+
+You can check logs via:
+  sudo journalctl -u dispatcharr -f
+  sudo journalctl -u dispatcharr-celery -f
+  sudo journalctl -u dispatcharr-celerybeat -f
+  sudo journalctl -u dispatcharr-daphne -f
+
+Visit the app at:
+  http://${server_ip}:${NGINX_HTTP_PORT}
+=================================================
+EOF
+}
+
+##############################################################################
+# Run Everything
+##############################################################################
+
+main() {
+  setup_locales
+  show_disclaimer
+  configure_variables
+  install_packages
+  create_dispatcharr_user
+  setup_postgresql
+  clone_dispatcharr_repo
+  setup_python_env
+  build_frontend
+  create_directories
+  ensure_env_file
+  django_migrate_collectstatic
+  configure_services
+  start_services
+  show_summary
+}
+
+main "$@"